This is a simple density-depth ocean water profile. You can see density increases with increasing depth. The pycnocline are layers of water where the water density changes rapidly with depth. This density-depth profile is typical of what you might expect to find at a latitude of 30-40 degrees south.
Click on image for full size Windows to the Universe original image
The density of ocean water at the sea surface is about 1027 kg/m3. The two main factors that affect density of ocean water are the temperature of the water and the salinity of the water. The density of ocean water continuously increases with decreasing temperature until the water freezes. Ocean water, with an average salinity of 35 psu, freezes at 28.5oF (-1.94oC). Increasing salinity also increases the density of sea water.
Temperature has a greater effect on the density of water than salinity does. So a parcel of water with higher salinity can actual float on top of water with lower salinity if the parcel with higher salinity is quite a bit warmer than the lower salinity parcel.
Whereas the circulation of surface waters of the ocean are driven by winds, the circulation of the deep waters are driven by density differences. Circulation in the depths of the ocean is referred to as thermohaline circulation. The deep ocean is layered with the densest water on bottom and the lightest water on top. Water tends to move horizontally throughout the deep ocean, moving along lines of equal density. Vertical circulation is thus limited because it is easier for water to move along lines of constant density (isopycnals) than across them.
The density of ocean water is rarely measured directly. If you wanted to measure the density of ocean water, you would have to collect a sample of sea water and bring it back to the laboratory to be measured. Density is usually calculated from in situ measurements of salinity, temperature and pressure. These in situ measurements are often made with a CTD instrument, where the instrument is placed in the ocean water from a ship or a platform. Once salinity, temperature and pressure have been measured, density can be derived from an equation called the equation of state of sea water.
About 70% of the Earth is covered with water, and we find 97% of that water in the oceans. Everyone who has taken in a mouthful of ocean water while swimming knows that the ocean is really salty. All water...more
The water at the ocean surface is moved primarily by winds. Large scale winds move in specific directions because they are affected by Earth’s spin and the Coriolis Effect. Because Earth spins constantly,...more
The world has several oceans, the Pacific, the Atlantic, the Indian, the Arctic, and the Southern Ocean. While we have different names for them, they are not really separate. There are not walls between...more
Seawater moves through the Atlantic as part of the Global Ocean Conveyor, the regular pattern by which seawater travels the world’s oceans. The water in the Global Ocean Conveyor circulates because of...more
To understand the dynamics of the Arctic Ocean and its impact on surrounding areas and global climate, one must understand the fundamentals of the system. Cold, relatively fresh water comes into the Arctic...more
Looking for online content that can be used for a climate change education course or module? Pages linked below can be used to support an introductory climate change education for either a unit or a full...more
An aquifer is the name for a layer of rock which is capable of holding a large amount of water. Some layers are better at holding water than others, for example a layer of sandstone can hold a good deal...more